BZMZQ - KODAK T-855-01 DEVELOPER, PART B, 860 0934
- MSDS: BZMZQ
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: KODAK T-855-01 DEVELOPER, PART B, 860 0934
- National Stock Number: 6750-00D004594
Product Identification
Product ID:KODAK T-855-01 DEVELOPER, PART B, 860 0934
MSDS Date:09/01/1993
FSC:6750
NIIN:00D004594
Kit Part:Y
MSDS Number: BZMZQ
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 800- 242-2424
Cage: 19139
Contractor
Telephone: 800-828-6203
Cage: 5K871
Ingredients
ACETIC ACID (CERCLA)
CAS: 64-19-7
RTECS: AF1225000
Fraction By Weight: 55-60%
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM/15 STEL; 9596
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 40-45%
Hazards
LD50 LC50 Mixture:TLV: ACETIC ACID: 10 PPM TWA; 15 PPM STL
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: VAPOR IRRITATING. EYES:
VAPOR IRRITATING. INGESTION: HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:EYES: CAUSES BURNS. EYES: CAUSES BURNS.
INGESTION: MAY CAUSE BURNS OF THE GASTROINTESTINAL TRACT IF
SWALLOWED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-MOVE TO FRESH AIR. TREAT SYMPTOMATICALLY. GET
MEDICAL ATTENTION. EYES-IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR
AT LEAST 15 MIN. GET MEDICAL ATTENTION IMMEDIATELY.
SKIN-IMMEDIATELY FLUSH W ITH WATER FOR 15 MIN WHILE REMOVING SOILED
CLOTHES/SHOES. GET MEDICAL ATTENNTION. INGESTED-DO NOT INDUCE
VOMITING. GIVE A GLASS OF WATER. CALL A PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY.
Fire Fighting
Flash Point:NONE
Extinguishing Media:USE APPROPIATE AGENT FOR ADJACENT FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. FLUSH TO SEWER
WITH LARGE AMOUNTS OF WATER. OTHERWISE, ABSORB SPILL WITH
VERMICULITE OR OTHER INERT MATERIAL, THEN PLACE IN A CONTAINER FOR
CHEMICAL WASTE. CLEAN SURFAC E THOROUGHLY TO REMOVE RESIDUAL
CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. KEEP AWAY FROM
INCOMPATIBLE SUBSTANCES. DO NOT BREATHE VAPOR. DO NOT GET IN EYES,
ON SKIN, ON CLOTHING.
Other Precautions:USE ONLY WITH ADEUATE VENTILATION. WASH THOROUGHLY
AFTER HANDLING.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS DO NOT MAINTAIN AIRBORNE
CONCENTRATIONS BELOW RECOMMENDED EXPOSURE LIMITS, AN APPROVED
RESPIRATOR MUST BE WORN. RESPIRATOR TYPE: ORGANIC VAPOR.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)S
HOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS, GOGGLE
Other Protective Equipment:EYE BATH, SAFETY SHOWER, WASHING FACILITIES.
Work Hygienic Practices:IF RESPIRATORS ARE USED, A PROGRAM SHOULD BE
INSTITUTED TO ASSURE COMPLIANCE WITH OSHA STANDARD 29 CFR 1910.134.
Supplemental Safety and Health
ECOLOGICAL INFORMATION: THIS MATERIAL IS A STRONGLY ACIDIC AQUEOUS
SOLUTION, AND THIS PROPERTY MAY CAUSE ADVERSE ENVIRONMENTAL
EFFECTS.
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18 MMHG
Vapor Density:0.6
Spec Gravity:1.063
pH:<2.0
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID; COLORLESS; VINEGAR ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE, OR LOCAL LAWS. FLUSH TO SEWER WITH LARGE
AMOUNTS OF WATER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.